Pre-Installation Setup for Symantec NetBackup > Adding a Symantec NetBackup Data Collector Policy
  
Version 9.2.01
Adding a Symantec NetBackup Data Collector Policy
The User ID and Passcode configured in this step will be used later when you install the Data Collector software on the Data Collector server. This configuration enables communication between the Portal and the Data Collector server.
Before adding the policy: A Data Collector must exist in the Portal, to which you will add Data Collector Policies. See Adding/Editing Data Collectors (Symantec NetBackup) and Adding Symantec NetBackup Servers.
 
1. Select Admin > Data Collection > Collectors.
The list of currently configured Portal Data Collectors is displayed.
2. Select a Data Collector from the list.
3. Click Add and select Symantec NetBackup as the Product Type.
4. Specify Data Collector Properties.
5. Add or select the parameters. Mandatory parameters are denoted by an asterisk (*):
Field
Description
Sample Value
Collector Domain
The domain of the collector to which the collector backup policy is being added. This is a read-only field. By default, the domain for a new policy will be the same as the domain for the collector. This field is set when you add a collector.
 
Policy Domain
The Collector Domain is the domain that was supplied during the Data Collector installation process. The Policy Domain is the domain of the policy that is being configured for the Data Collector. The Policy Domain must be set to the same value as the Collector Domain.
The domain identifies the top level of your host group hierarchy. All newly discovered hosts are added to the root host group associated with the Policy Domain.
Typically, only one Policy Domain will be available in the drop-down list. If you are a Managed Services Provider, each of your customers will have a unique domain with its own host group hierarchy.
To find your Domain name select Admin > Hosts and Domains > Domains.
yourdomain
NetBackup Master Servers
Select the NetBackup Master Server(s) from which data will be collected. Multi-select is supported.
 
Backup Software Location (on Data Collector Server)
Backup Software Location should be either the root folder or directory where the NetBackup Remote Administration Console for Windows software is installed, or the root folder to the netbackup/volmgr folder(s) where the NetBackup software is installed.
Default Backup Software Home location for NetBackup:
For Windows: C:\Program Files\Veritas.
For Linux: /usr/openv.
 
Login Details for Remote Probes
These details are only used if this collector is a centralized NetBackup Data Collector and the SLP Job Details probe is selected.
Master Server Domain
This is only required for Windows, and only if using a Domain user to log in.
Required only for SLP Job Details collection and only when the Data Collector is not installed on the NetBackup Master Server.
Specify the domain associated with the NetBackup Master Server User ID. Only used for remote lifecycle policies utility (nbstlutil) execution by the SLP Job Details probe; unused for remote Linux master servers.
 
Master Server User ID
Required only for SLP Job Details collection and only when the Data Collector is not installed on the NetBackup Master Server.
Specify the user name with login rights on the selected NetBackup Master Server. Only used for remote lifecycle policies utility (nbstlutil) execution by the SLP Job Details probe. On Windows, this must be a user with Administrator privileges on the NBU master server. On other platforms it can be any user with permission to execute the NBU administration commands.
 
Master Server Password
Required only for SLP Job Details collection and only when the Data Collector is not installed on the NetBackup Master Server.
The password associated with the NetBackup Master Server User ID. Only used for remote lifecycle policies utility (nbstlutil) execution by the SLP Job Details probe.
 
WMI Proxy Address
Required only for SLP Job Details collection and only when the Data Collector is not installed on the NetBackup Master Server.
If the Master Server being collected from is a Windows server: Specify the IP address or hostname of the WMI Proxy. If this field is blank, 127.0.0.1 will be used. Only used for remote nbstlutil execution during SLP Job Details probe.
 
Active Probes
Tape Library & Drive Inventory
Select the check box to activate Tape Library data collection from your NetBackup environment. The default polling frequency is every 12 hours. This probe is selected by default. Click the clock icon to create a schedule frequency for collecting data. You can schedule the collection frequency by minute, hour, day, week and month. Advanced use of native CRON strings is also available. Optimize performance by scheduling less frequent collection.
Note: Explicit schedules set for a Collector policy are relative to the time on the Collector server. Schedules with frequencies are relative to the time that the Data Collector was restarted.
CRON example:
*/30 * * * *
 
Tape Inventory
Select the check box to activate Tape data collection from your NetBackup environment. The default polling frequency is every 18 hours. This probe is selected by default. Click the clock icon to create a schedule frequency for collecting data. You can schedule the collection frequency by minute, hour, day, week and month. Advanced use of native CRON strings is also available. Optimize performance by scheduling less frequent collection.
Note: Explicit schedules set for a Collector policy are relative to the time on the Collector server. Schedules with frequencies are relative to the time that the Data Collector was restarted.
CRON example:
*/30 * * * *
 
Drive Status
Select the check box to activate Tape Drive status collection from your NetBackup environment. The default polling frequency is every 20 minutes. This probe is selected by default.Click the clock icon to create a schedule frequency for collecting data. You can schedule the collection frequency by minute, hour, day, week and month. Advanced use of native CRON strings is also available.
Note: Explicit schedules set for a Collector policy are relative to the time on the Collector server. Schedules with frequencies are relative to the time that the Data Collector was restarted.
CRON example:
*/30 * * * *
 
Storage Unit Details
Select the check box to activate Storage Unit data collection from your NetBackup environment. The default polling frequency is every 4 hours. This probe is selected by default. Click the clock icon to create a schedule frequency for collecting data. You can schedule the collection frequency by minute, hour, day, week and month. Advanced use of native CRON strings is also available.
Note: Explicit schedules set for a Collector policy are relative to the time on the Collector server. Schedules with frequencies are relative to the time that the Data Collector was restarted.
CRON example:
*/30 * * * *
 
Storage Lifecycle Policies
When selecting this option, you must also configure settings in the Login Details for Remote Probes section of this Data Collector policy. Select the check box to activate Storage Lifecycle Policy (SLP) collection from your NetBackup environment. The default polling frequency is every 8 hours. This probe is selected by default. Click the clock icon to create a schedule frequency for collecting data. You can schedule the collection frequency by minute, hour, day, week and month. Advanced use of native CRON strings is also available.
Note: Explicit schedules set for a Collector policy are relative to the time on the Collector server. Schedules with frequencies are relative to the time that the Data Collector was restarted.
CRON example:
*/30 * * * *
 
Backup Policies
Select the check box to activate Backup Policy data collection from your NetBackup environment. The default polling frequency is every 8 hours. This probe is selected by default. Click the clock icon to create a schedule frequency for collecting data. You can schedule the collection frequency by minute, hour, day, week and month. Advanced use of native CRON strings is also available.
Note: Explicit schedules set for a Collector policy are relative to the time on the Collector server. Schedules with frequencies are relative to the time that the Data Collector was restarted.
CRON example:
*/30 * * * *
 
Job Details
Select the check box to activate Job data collection from your NetBackup environment. The default polling frequency is every 35 minutes. This probe is selected by default. Click the clock icon to create a schedule frequency for collecting data. You can schedule the collection frequency by minute, hour, day, week and month. Advanced use of native CRON strings is also available.
Note: Explicit schedules set for a Collector policy are relative to the time on the Collector server. Schedules with frequencies are relative to the time that the Data Collector was restarted.
CRON example:
*/30 * * * *
 
Duplication Jobs
Select the check box to activate Duplication Job data collection from your NetBackup environment. The default polling frequency is every 60 minutes. This probe is selected by default. Click the clock icon to create a schedule frequency for collecting data. You can schedule the collection frequency by minute, hour, day, week and month. Advanced use of native CRON strings is also available.
Note: Explicit schedules set for a Collector policy are relative to the time on the Collector server. Schedules with frequencies are relative to the time that the Data Collector was restarted.
CRON example:
*/30 * * * *
 
Backup Message Logs
Select the check box to activate Message Log (bperror) data collection from your NetBackup environment. The default polling frequency is every 60 minutes. This probe is selected by default. Click the clock icon to create a schedule frequency for collecting data. You can schedule the collection frequency by minute, hour, day, week and month. Advanced use of native CRON strings is also available.
Note: Explicit schedules set for a Collector policy are relative to the time on the Collector server. Schedules with frequencies are relative to the time that the Data Collector was restarted.
CRON example:
*/30 * * * *
 
SLP Job Details
Select the check box to activate SLP Job Details collection from your NetBackup environment. The default polling frequency is every 6 hours.
IMPORTANT: When selecting this SLP Job Details option, if you are using centralized NetBackup data collection, you must also configure the settings in the Login Details for Remote Probes section of this Data Collector policy.
 
Client Details
Select the check box to activate Client Details data collection from your NetBackup environment. The default polling frequency is once a week. This probe is selected by default. Click the clock icon to modify the schedule frequency for collecting data. You can schedule the collection frequency by minute, hour, day, week and month. Advanced use of native CRON strings is also available. The default collection is scheduled to start on Tuesday at 9:00 a.m.
Note: Explicit schedules set for a Collector policy are relative to the time on the Collector server. Schedules with frequencies are relative to the time that the Data Collector was restarted.
 
Media Server Disk Discovery
This discovery process probes all the media servers associated with the management server to gather disk-based information such as capacity and free space on the media server file systems. This information is then displayed in the “Disk Usage and Performance” report. If the Media Server Disk Discovery process is not enabled, the disk information will show as Unknown in the report.
The default polling frequency is every 20 minutes. This probe is selected by default. Click the clock icon to create a schedule frequency for collecting data. You can schedule the collection frequency by minute, hour, day, week and month. Advanced use of native CRON strings is also available.
Note: Explicit schedules set for a Collector policy are relative to the time on the Collector server. Schedules with frequencies are relative to the time that the Data Collector was restarted.
CRON example:
*/30 * * * *
 
Client Drive Discovery
This feature requires a Discovery license. Therefore, do not check this check box unless you have activated this license. This discovery process seeks out hosts and devices in your environment. The process identifies all hosts in your environment, in particular those that are not currently stored in the reporting database and are therefore potentially not being backed up. This probe uses SNMP to probe for drive utilization; therefore, SNMP must be enabled.
The default polling frequency is every 40 minutes. Click the clock icon to create a schedule frequency for collecting data. You can schedule the collection frequency by minute, hour, day, week and month. Advanced use of native CRON strings is also available.
Note: Explicit schedules set for a Collector policy are relative to the time on the Collector server. Schedules with frequencies are relative to the time that the Data Collector was restarted.
CRON example:
*/30 * * * *
 
Backup Policy Coverage
This feature requires a Discovery license. Therefore, do not check this check box unless you have activated this license. This discovery process probes all the NetBackup clients known to the database that are associated with the management server. A client is determined to be associated with the management server if it belongs to a policy associated with the management server. This probe uses SNMP to probe for drive utilization; therefore, SNMP must be enabled. View the “Client Protection Summary” report to identify how well your data is being protected. If this report is not in your list of available reports, you do not have a Discovery license.
The default polling frequency is every 35 minutes. Click the clock icon to create a schedule frequency for collecting data. You can schedule the collection frequency by minute, hour, day, week and month. Advanced use of native CRON strings is also available.
Note: Explicit schedules set for a Collector policy are relative to the time on the Collector server. Schedules with frequencies are relative to the time that the Data Collector was restarted.
CRON example:
*/30 * * * *
 
6. Click OK to save the Policy.
7. On the Data Collector server, install/update the Data Collector software.
For additional details about NetBackup Discovery, see Discovery Policies for Symantec NetBackup and Enable SNMP for Discovery.