Working with Capacity Manager Host Data Collection > Host Management
  
Version 10.3.00P13
Host Management
Now that you’ve set up the prerequisites, you’ll use the steps described in this section for on-going Host Management. For additional prerequisite details, see Host Resources Prerequisites and Configurations and Host Discovery and Collection Configuration Steps.
Once the prerequisite settings are configured, create a Host Discovery Policy to enable the process of finding hosts in your environment and populating your inventory of hosts.
The Host Management processes include:
Configure and validate hosts in the inventory
Enable and manage on-going collection
Several tools facilitate Host discovery and collection, as described in the following sections:
Configure Host Discovery Policies to Populate the Host Discovery and Collection View
Execute and Monitor Host Discovery
Validate Host Connectivity
Search and Export in Host Discovery and Collection
Export in Host Discovery and Collection
Configure and Edit Host Probes
Configure Host Discovery Policies to Populate the Host Discovery and Collection View
Host Discovery begins with a Discovery Policy, which identifies the Data Collector that will gather information about hosts in your environment. In addition, a policy has an associated set of credentials, WMI proxies, and paths to access commands on the hosts. For additional pre-requisite details, see Host Resources Prerequisites and Configurations and Host Discovery and Collection Configuration Steps.
A Discovery Policy typically is used once to initially populate your host inventory. Executing a discovery policy more than once has no effect for hosts that were previously discovered. To identify and resolve connectivity issues, see Validate Host Connectivity.
Although all hosts can be included in a single policy, you might want to create one or more Host Discovery Policies in the following recommended groupings:
by OS (Windows or Linux) - This grouping is essential, as the probes and parameters are OS-specific.
by common attributes, such as User ID, password, access control commands (sudo, pbrun, sesudo), PATH
by application, such as Oracle or Exchange
Discovery Policy Considerations
If your enterprise configures hosts to lock out access after multiple failed authentication attempts, take the following tips into consideration:
If you choose more than one credential in the Discovery Policy credentials list, you risk host authentication failure lock-out. The discovery process will try the first credentials and if they fail, discovery will try the next credentials that you’ve selected. Therefore, if your hosts are configured to prevent multiple authentication retries, multiple failed attempts may cause a lock-out.
If multiple Discovery Policies are running simultaneously, with one policy using an IP address to access the host and the other policy using a name to access the host, the multiple access attempts may cause a lock-out. Note that if the authentication attempts are successful, only one host record is added to the inventory.
Configure a Discovery Policy
Note: A Discovery Policy typically is used once to initially populate your host inventory. Executing a discovery policy more than once has no effect for the subsequent runs for hosts that have already been discovered and added to the inventory.
For additional information about Host Discovery and Collection, see:
Before Discovering Hosts
Execute and Monitor Host Discovery
Validate Host Connectivity
Search and Export in Host Discovery and Collection
To create/edit Host Discovery Policies, in the toolbar select:
1. Select Admin > Data Collection > Host Discovery and Collection.
2. Click Discover Hosts.
3. Click Add to configure settings and then click OK.
 
Field
Description
Sample Values
Name*
Assign a name to identify this Discovery Policy.
 
Collector*
Select the data collector from the drop-down list
 
Domain*
Select the Domain from the list; for most environments, only one Domain is displayed. Multiple domains facilitate management for Managed Services Partners (MSPs).
 
Host addresses*
A range of IP addresses can be specified
Hostnames and/or IP addresses can be listed, separated by commas
192.168.0.1-250
 
172.168.1.21, ABChost1, ABChost2, 172.168.1.58
Excludes
List any known IP addresses that you know are not valid for host collection; for example, the IP address of a printer. IP address ranges are also supported.
 
Configuration options
This list gets populated when you select a Domain at the top of the Host Discovery Policies window.
Credentials
WMI Proxies
Paths
Expand these lists to select the configurations to be used by this Discovery Policy.
IMPORTANT NOTE: If you choose more than one credential in the list, you risk host authentication failure lock-out. The discovery process will try the first credentials and if they fail, discovery will try the next credentials that you’ve selected. Therefore, if your hosts are configured to prevent multiple authentication retries, multiple failed attempts may cause a lock-out.
 
Execute and Monitor Host Discovery
Execute a Discovery Policy
1. Click Discover Hosts to list the Host Discovery Policies.
2. Select the Discovery Policy.
3. Click Start. At this point, the discovery process begins. It may take a few minutes for the background processes to initiate the discovery.
4. Click OK.
5. Refresh the view you launched in step 1 or go to Discovery Processes to verify that the discovery process is running.
Discovery Processes
Several methods can be used to progress:
Method 1
1. At the bottom of the Host Discovery and Collection window, double-click the Discoveries in progress link to launch the Host Discovery Policies window. Note the Status at the right of the window.
2. Double-click the Discovery Policy to view the settings.
Method 2
1. Using the Host Discovery and Collection Advanced Parameters function, search for hosts associated with a Discovery policy to see what hosts have been found.
Validate Host Connectivity
The Validate step executes the necessary validation steps and provides a summary of the overall success/failure. The Validation process steps through a handshake process, executing the preliminary steps that will occur during data collection. The informative messages enable you to pro-actively identify issues prior to initiating the data collection process.
Validate Hosts
The Validation process identifies issues such as:
Credential Validation Failures - Verify account IDs and passwords.
Probe Errors - For example, an HBA probe may fail on a host that does not have an HBA. Other similar errors include iSCSI port not found or LUN not found.
Connection Failures - The host may not be reachable.
DNS Lookup Failures - IP addresses may not have been configured correctly.
OS Verification Failures - Check the Access Control or WMI Proxy settings. In addition, verify that the paths are valid for the host’s operating system.
Command Errors - Verify that the Path and Access Control settings are correct.
Validation automatically occurs when the Data Collection processes are initiated; however, you can manually start the processes to get immediate feedback so that you can troubleshoot issues.
1. In the Host Discovery and Collection window, search for hosts. You can search by a Discovery Policy to see the results of a discovery. See Discovery Processes.
2. Click one or more hosts and then click Validate at the bottom of the window.
3. Click Show Validations at the bottom right of the window to verify that the validation has begun. A list of the hosts that are currently being validated are displayed. See Validation History.
Validation History
Once a set of hosts have been selected for validation the current status, as well as the history, can be viewed in a pop-up box.
1. At the bottom right of the Host Discovery and Collection window, click Show Validations.
Validation History: A list of the past 10 validations is displayed. These are hyperlinks that can be used to access the list of hosts associated with that validation process.
Validations in progress: Click this link to view the status of the current validation process.
2. Click the link to either display validations in progress or the hosts that were included in previous validations.
Show Errors
Before host data can be successfully collected, a number of configuration steps need to be taken. The Show Errors button enables you to identify details to help you troubleshoot host inventory collection issues.
Show Errors lists issues specific to:
Connectivity
Probes
Validation
Use the following example and steps to view troubleshooting messages.
1. Search the Host Discovery and Collection window to view a list of hosts.
2. Select a host in the list that displays failure icons (in the above example, three probes have exclamation points in red circles).
3. Click Show Errors to display the Messages window for the selected host.
4. Double-click a message in the Messages window to view the details.
5. Take the recommended steps provided in the message details to rectify the issue. Then, re-validate the host.
Filter the Host Discovery and Collection window - Hide/Unhide, Remove
The Host Discovery process populates your inventory with hosts it finds. Often, discovery policies are designed to discover an IP address range. Host Discovery creates a record for every IP address in the range, even if it’s not in use. Therefore, invalid IP addresses will appear in your Host Inventory. In addition, Discovery may find printers, routers, or switches, or other devices that aren’t relevant for host data collection.
To filter your Host Discovery and Collection window to include only hosts for which you want data collected, use the following options:
Hide - Select a host in the inventory and click Hide at the bottom of the window. When you Hide a host, it will not appear in your search results.
Unhide - If you list hosts that have been hidden, the Hide button will be toggled to Unhide. Use the Advanced Parameters option, Search hidden hosts, to view a list of hidden hosts.
Remove - Select a host in the inventory and click Remove at the bottom of the window. When you choose to remove a host, if you execute the Discovery Policy again, it will re-add it to the inventory. You may have an IP address that is now associated with a device that is different from the one that was discovered.
Search and Export in Host Discovery and Collection
The Host Discovery and Collection window offers a Search feature to help you find hosts that have been discovered.
Basic Search
Note: A search with no specified criteria returns all hosts in your inventory.
Pre-Defined Search
Several pre-defined searches enable easy access to host lists that are useful for troubleshooting.
Active policy but not collected since... (Note: When you select this option, a calendar pop-up enables date selection.)
No active policy but was previously active (This means host data was successfully collected at an earlier time.)
Credentials failing but were previously successful
Collections failing but were previously successful
For more specific search parameters, click More (once clicking More, the button displays Less) to enter Advanced Parameters.
Advanced Parameters
Select specific search criteria to narrow the list of hosts displayed in the inventory. Use Ctrl+Click to select multiple values.
Search criteria within a category is mutually exclusive, so if you select multiple values, it functions as an OR statement. Search criteria across categories is an AND statement. For example, if you select the values Memory and Network from the Probe category and the value Error from Probe Status, the search query is:
(Probe = Memory OR Probe = Network) AND Status =Error
When you check the Search hidden hosts box, only hidden hosts will be displayed in the Host Inventory window. Also, the Hide button in the Host Inventory window will toggle to Unhide.
When searching on Probes, if a probe was at some point activated, but then de-activated, it will appear in the search results because there is an entry in the database table.
Export in Host Discovery and Collection
To export the details of the Host Discovery and Collection to a comma-separated-values file (.csv):
1. Search without supplying any values in the search criteria fields. See Search and Export in Host Discovery and Collection.
2. In the Search area at the top of the Host Discovery and Collection list, click Export.
The resulting file will include values for the status of each of the available probes. For example, the values will be similar to N/U or Y/S, as described in the following table.
E
Error
F
Failure
N
No - Not Active
S
Success
U
Unknown
W
Warning
Y
Yes - Active Probe
Configure and Edit Host Probes
Host Data Collection can gather the following information by probing hosts:
Host Probes: Capacity (HBA, iSCSI, Volume Manager, Multi-pathing)
Host Probes: Memory, Network, Process, Performance, System
Application Probes: Exchange, SQL Server, Oracle, Oracle ASM
Probes
To configure probes for a host:
1. Search for hosts in the Discovery and Collection list. A search with no specified criteria returns all hosts in the Discovery and Collection list.
2. Mouse over each of the Probe icons at the right of the Discovery and Collection list to view the probe type.
3. Double-click a host in the inventory or select a host and click Edit Probes to configure/view the Host Probe Settings window. For details see Probe Settings.
Probe settings must be configured to ensure successful communication with the hosts. In addition, the frequency of each probe can be customized.
4. Click each tab to updated the configuration settings for the specific probes.
5. For the SQL Server and Oracle probes, you can create multiple instances, using the following steps:
a Click Add.
b Enter the mandatory configuration. See Probe Settings.
c Click OK.
Propagate Probe Settings: Copy Probes, Paste Probes
Whenever you have hosts with common attributes, you can save time by configuring probe settings for one host and then copying and pasting those settings to other hosts.
A key advantage to using the probe copy/paste feature is the ability to propagate the probe schedules to multiple hosts. In addition, you can explicitly select the probes you want to activate.
Note: You only can copy/paste probes that are within the same Domain. This mainly impacts Managed Services Partners with multi-domain environments. Use the Advanced Search function to list probes within a specific Domain.
Example of Probe Copy/Paste
1. Search for all Linux hosts.
2. Configure the probes for one of the hosts in your Linux list and click Copy Probes.
3. Finally, select the remaining Linux hosts and click Paste Probes.
The icons of configured Probes will be highlighted in the Paste Probes window; however, you must explicitly check those probes to copy the probe schedules and to activate the probes. Use the Select Active Probes button to select active probes.
By default, the probe check boxes are unchecked, enabling you to explicitly select the probes that you want to paste. Or, click Select All to turn on all the probes for the selected host.
Probe Settings
Table 2 Probe Settings
Probe Type
Parameters
Description
Capacity
HBA
iSCSI
Volume Manager
Multi-pathing
Probe schedule*
A schedule in cron format; for example:
*/20 9-18 * * *
which translates to “every 20 minutes between the hours of 9 a.m. and 6 p.m.”
Memory
Probe schedule*
A schedule in cron format; for example:
*/20 9-18 * * *
which translates to “every 20 minutes between the hours of 9 a.m. and 6 p.m.”
Network
Probe schedule*
A schedule in cron format; for example:
*/20 9-18 * * *
which translates to “every 20 minutes between the hours of 9 a.m. and 6 p.m.”
Process
Probe schedule*
A schedule in cron format; for example:
*/20 9-18 * * *
which translates to “every 20 minutes between the hours of 9 a.m. and 6 p.m.”
Performance
Probe schedule*
For Windows, only CPU performance will be collected. For Linux, both CPU and device performance will be collected. CPU performance includes CPU allocation and usage. Device performance includes throughput and latency for disk partitions.
Note: The sysstat utility must be installed on the Linux servers or storage nodes for Linux host performance data collection.
A schedule in cron format; for example:
*/20 9-18 * * *
which translates to “every 20 minutes between the hours of 9 a.m. and 6 p.m.”
System
Probe schedule*
A schedule in cron format; for example:
*/20 9-18 * * *
which translates to “every 20 minutes between the hours of 9 a.m. and 6 p.m.”.
Exchange
Collect
Check this box to activate collection on an on-going basis. When it is unchecked, only initial validation will attempt this probe.
Probe schedule
 
A schedule in cron format; for example:
*/20 9-18 * * *
which translates to “every 20 minutes between the hours of 9 a.m. and 6 p.m.”
Active Directory Host
Host name or address
Active Directory Port
For example: 389
Active Directory Base DN*
The starting point for the Active Directory. For example:
CN=Services,CN=Configuration,
DC=contoso2003,DC=com
Several tools are available to help you identify the Base DN:
Active Directory User Name
Active Directory User Name
This username must have privileges to search under the base DN within the Active Directory. Typically, this is an Administrator.
Password
Active Directory Password
SQL Server
Collect
Check this box to activate collection on an on-going basis. When it is unchecked, only initial validation will attempt this probe.
Probe schedule
A schedule in cron format; for example:
*/20 9-18 * * *
which translates to “every 20 minutes between the hours of 9 a.m. and 6 p.m.”
Database*
The name of the database within the SQL server.
Instance
The system identifier to identify the SQL server database instance—for example: BKUPEXEC.
Specify either an instance name or a port. If an instance name is not specified, MSSQLSERVER is substituted.
Port
To identify the SQL server instance, provide either an instance name or a database port number; for example: 1433.
If a port number is not specified, the port is determined automatically from the instance name.
Account*
Database access user name
The data collector requires a user account with permissions to execute the stored procedures
Password*
Database access password
Windows Authentication
Check this box if you want Windows authentication rather than SQL server authentication.
Oracle
Collect
Check this box to activate collection on an on-going basis. When it is unchecked, only initial validation will attempt this probe.
Probe schedule
A schedule in cron format; for example:
*/20 9-18 * * *
which translates to “every 20 minutes between the hours of 9 a.m. and 6 p.m.”
SID*
The system identifier to identify the database instance.
Port*
Database port number; default: 1521
Username*
The Oracle user must have the following role granted:
SELECT_CATALOG_ROLE
To grant this access, use:
GRANT SELECT_CATALOG_ROLE TO ‘user
where user is the database Username that you’ll provide here.
Password*
Database access password
Oracle ASM
Collect
Check this box to activate collection on an on-going basis. When it is unchecked, only initial validation will attempt this probe.
Probe schedule
A schedule in cron format; for example:
*/20 9-18 * * *
which translates to “every 20 minutes between the hours of 9 a.m. and 6 p.m.”
Account*
The Oracle user privileges required:
 
SYSDBA privilege if 10g
sysasm in 11g
Password*
Database access password
Port*
Database port number; default: 1521
ASM Instance*
The name that identifies the database instance.
Collect
Check this box to activate collection on an on-going basis. When it is unchecked, only initial validation will attempt this probe.
Probe schedule
Default is once a month.
A schedule in cron format; for example:
*/20 9-18 * * *
which translates to “every 20 minutes between the hours of 9 a.m. and 6 p.m.”