For details, refer to the APTARE StorageConsole Certified Configurations Guide and the APTARE StorageConsole Data Collector Installation Guide for Backup Manager.
IBM TSM - Planning the Data Collector Deployment
1. Identify a server where the Data Collector software will be installed. Server requirements include:
• 64-bit OS. See the APTARE StorageConsole Certified Configurations Guide for supported operating systems.
• Support Java Runtime Environment (JRE) 1.7.
• Reside in the same time zone as the subsystem from which data will be collected.
• If the backup servers belong to a cluster, StorageConsole communicates with the cluster for data collection.
• For performance reasons, APTARE recommends that you do not install Data Collectors on the same server as the StorageConsole Portal. However, if you must have both on the same server, verify that the Portal and Data Collector software do not reside in the same directory.
• Install only one Data Collector on a server (or OS instance).
2. On the Data Collector server, add entries to the local hosts file, both resolving to the Portal server IP address. Example:
Example:
• 172.16.2.2 aptareportal.<yourdomain>.com
• 172.16.2.3 aptareagent.<yourdomain>.com
Data Collector Configurations Specific to TSM
1. Note the port used by the TSM Data Collector (dsmadmc): TCP 1500.
2. TSM data collection requires a dedicated Data Collector.
3. In the Portal, add a TSM server: Admin > Hosts and Domains > Hosts and Host Groups.
• dsmadmc must be installed on this server.
• For Linux platforms, this server must be added to dsm.sys so the Data Collector can use the dsmadmc command.
• Internal Name - Must match the host name of the TSM server.
• IP Address - IP address of the TSM server.
• Type - TSM Server.
4. Gather the following required configuration details:
• Instance Name: For Linux TSM servers, use the TSM Instance Name. For MS Windows, use the IP address of the TSM Instance.
• Backup Software Location: Path to the TSM Admin Client software (dsmadmc) on the Data Collector server.
• Configure a view-only User ID and Passcode in the Data Collector policy to enable communication between the Portal and the Data Collector server.
5. Configure a Data Collector policy using the following details.
6. On the Data Collector server, install/update the Data Collector software, using the instructions in the APTARE StorageConsole Data Collector Installation Guide for Backup Manager.