For details, refer to the APTARE StorageConsole Certified Configurations Guide and the APTARE StorageConsole Data Collector Installation Guide for Capacity Manager.
EMC CLARiiON (VNX Block) - Planning the Data Collector Deployment
1. Identify a server where the Data Collector software will be installed. Server requirements include:
• 64-bit OS. See the APTARE StorageConsole Certified Configurations Guide for supported operating systems.
• Support Java Runtime Environment (JRE) 1.7.
• Reside in the same time zone as the subsystem from which data will be collected.
• If the backup servers belong to a cluster, StorageConsole communicates with the cluster for data collection.
• For performance reasons, APTARE recommends that you do not install Data Collectors on the same server as the StorageConsole Portal. However, if you must have both on the same server, verify that the Portal and Data Collector software do not reside in the same directory.
• Install only one Data Collector on a server (or OS instance).
Data Collector Configurations Specific to EMC CLARiiON
1. Note the port used by the EMC CLARiiON Data Collector: NaviCLI 443/2163/6389/6390/6391/6392.
2. NaviSecCLI must be installed on the Data Collector server.
3. A low security level for certificates is required. Ensure this setting by using the following command:
naviseccli security -certificate -setLevel low
4. Gather the following required configuration details:
• Array Addresses: List of IP addresses to be probed, only one storage processor address per array.
• EMC Navi Client Software Location: Path of the software installation.
• NaviSuite User ID & Password: Credentials for a view-only user ID.
5. Configure a Data Collector policy using the following additional details.
6. On the Data Collector server, add entries to the local hosts file, both resolving to the Portal server IP address.
Example:
7. 172.16.2.2 hbsmportal.<yourdomain>.com
8. 172.16.2.3 hbsmagent.<yourdomain>.com
9. On the Data Collector server, install/update the Data Collector software, using the instructions in the APTARE StorageConsole Data Collector Installation Guide for Capacity Manager.
10. On the Data Collector server, add entries to the local hosts file, both resolving to the Portal server IP address.
Example:
11. 172.16.2.2 hbsmportal.<yourdomain>.com
12. 172.16.2.3 hbsmagent.<yourdomain>.com
13. On the Data Collector server, install/update the Data Collector software, using the instructions in the APTARE StorageConsole Data Collector Installation Guide for Capacity Manager.