Default Apache SSL Configuration File Version 10.0.00

SSL Certificate Configuration > Default Apache SSL Configuration File

Version 10.0.00

Default Apache SSL Configuration File

# This is the Apache server configuration file providing SSL support.

# It contains the configuration directives to instruct the server how to

# serve pages over an https connection. For detailing information about these

# directives see <URL:http://httpd.apache.org/docs/2.2/mod/mod_ssl.html>

# Do NOT simply read the instructions in here without understanding

# what they do. They're here only as hints or reminders. If you are unsure

# consult the online docs. You have been warned.

# Pseudo Random Number Generator (PRNG):

# Configure one or more sources to seed the PRNG of the SSL library.

# The seed data should be of good random quality.

# WARNING! On some platforms /dev/random blocks if not enough entropy

# is available. This means you then cannot use the /dev/random device

# because it would lead to very long connection times (as long as

# it requires to make more entropy available). But usually those

# platforms additionally provide a /dev/urandom device which doesn't

# block. So, if available, use this one instead. Read the mod_ssl User

# Manual for more details.

#SSLRandomSeed startup file:/dev/random 512

#SSLRandomSeed startup file:/dev/urandom 512

#SSLRandomSeed connect file:/dev/random 512

#SSLRandomSeed connect file:/dev/urandom 512

# When we also provide SSL we have to listen to the

# standard HTTP port (see above) and to the HTTPS port

# Note: Configurations that use IPv6 but not IPv4-mapped addresses need two

# Listen directives: "Listen [::]:443" and "Listen 0.0.0.0:443"

Listen 443

## SSL Global Context

## All SSL configuration in this context applies both to

## the main server and all SSL-enabled virtual hosts.

# Some MIME-types for downloading Certificates and CRLs

AddType application/x-x509-ca-cert .crt

AddType application/x-pkcs7-crl .crl

# Pass Phrase Dialog:

# Configure the pass phrase gathering process.

# The filtering dialog program (`builtin' is a internal

# terminal dialog) has to provide the pass phrase on stdout.

SSLPassPhraseDialog builtin

# Inter-Process Session Cache:

# Configure the SSL Session Cache: First the mechanism

# to use and second the expiring timeout (in seconds).

#SSLSessionCache "dbm:/opt/apache/logs/ssl_scache"

SSLSessionCache "shmcb:/opt/apache/logs/ssl_scache(512000)"

SSLSessionCacheTimeout 300

# Semaphore:

# Configure the path to the mutual exclusion semaphore the

# SSL engine uses internally for inter-process synchronization.

SSLMutex "file:/opt/apache/logs/ssl_mutex"

## SSL Virtual Host Context

ServerName ~AGENT_HOST~.~DOMAIN_NAME~:443

DocumentRoot ~PORTAL_BASE~/datarcvr

DirectoryIndex index.jsp

ErrorLog "|/opt/apache/bin/rotatelogs /opt/apache/logs/aptareportalSSL-error_%Y-%m-%d-%H_%M_%S.log 50M"

CustomLog "|/opt/apache/bin/rotatelogs /opt/apache/logs/aptareportalSSL-access_%Y-%m-%d-%H_%M_%S.log 50M" common

Alias / ~PORTAL_BASE~/datarcvr/

JkMount /*.jsp agent

JkMount /*.do agent

JkMount /servlet/* agent

# SSL Engine Switch:

# Enable/Disable SSL for this virtual host.

SSLEngine on

# SSL Cipher Suite:

# List the ciphers that the client is permitted to negotiate.

# See the mod_ssl documentation for a complete list.

SSLCipherSuite ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL

# Server Certificate:

# Point SSLCertificateFile at a PEM encoded certificate. If

# the certificate is encrypted, then you will be prompted for a

# pass phrase. Note that a kill -HUP will prompt again. Keep

# in mind that if you have both an RSA and a DSA certificate you

# can configure both in parallel (to also allow the use of DSA

# ciphers, etc.)

SSLCertificateFile "/opt/apache/conf/ssl_cert/server.crt"

# Server Private Key:

# If the key is not combined with the certificate, use this

# directive to point at the key file. Keep in mind that if

# you've both a RSA and a DSA private key you can configure

# both in parallel (to also allow the use of DSA ciphers, etc.)

SSLCertificateKeyFile "/opt/apache/conf/ssl_cert/server.key"

# Server Certificate Chain:

# Point SSLCertificateChainFile at a file containing the

# concatenation of PEM encoded CA certificates which form the

# certificate chain for the server certificate. Alternatively

# the referenced file can be the same as SSLCertificateFile

# when the CA certificates are directly appended to the server

# certificate for convinience.

#SSLCertificateChainFile "/opt/apache/conf/server-ca.crt"

# Certificate Authority (CA):

# Set the CA certificate verification path where to find CA

# certificates for client authentication or alternatively one

# huge file containing all of them (file must be PEM encoded)

# Note: Inside SSLCACertificatePath you need hash symlinks

# to point to the certificate files. Use the provided

# Makefile to update the hash symlinks after changes.

#SSLCACertificatePath "/opt/apache/conf/ssl.crt"

#SSLCACertificateFile "/opt/apache/conf/ssl.crt/ca-bundle.crt"

# Certificate Revocation Lists (CRL):

# Set the CA revocation path where to find CA CRLs for client

# authentication or alternatively one huge file containing all

# of them (file must be PEM encoded)

# Note: Inside SSLCARevocationPath you need hash symlinks

# to point to the certificate files. Use the provided

# Makefile to update the hash symlinks after changes.

#SSLCARevocationPath "/opt/apache/conf/ssl.crl"

#SSLCARevocationFile "/opt/apache/conf/ssl.crl/ca-bundle.crl"

# Client Authentication (Type):

# Client certificate verification type and depth. Types are

# none, optional, require and optional_no_ca. Depth is a

# number which specifies how deeply to verify the certificate

# issuer chain before deciding the certificate is not valid.

#SSLVerifyClient require

#SSLVerifyDepth 10

# Access Control:

# With SSLRequire you can do per-directory access control based

# on arbitrary complex boolean expressions containing server

# variable checks and other lookup directives. The syntax is a

# mixture between C and Perl. See the mod_ssl documentation

# for more details.

#<Location />

#SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \

# and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \

# and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \

# and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \

# and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \

# or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/

#</Location>

# SSL Engine Options:

# Set various options for the SSL engine.

# o FakeBasicAuth:

# Translate the client X.509 into a Basic Authorisation. This means that

# the standard Auth/DBMAuth methods can be used for access control. The

# user name is the `one line' version of the client's X.509 certificate.

# Note that no password is obtained from the user. Every entry in the user

# file needs this password: `xxj31ZMTZzkVA'.

# o ExportCertData:

# This exports two additional environment variables: SSL_CLIENT_CERT and

# SSL_SERVER_CERT. These contain the PEM-encoded certificates of the

# server (always existing) and the client (only existing when client

# authentication is used). This can be used to import the certificates

# into CGI scripts.

# o StdEnvVars:

# This exports the standard SSL/TLS related `SSL_*' environment variables.

# Per default this exportation is switched off for performance reasons,

# because the extraction step is an expensive operation and is usually

# useless for serving static content. So one usually enables the

# exportation for CGI and SSI requests only.

# o StrictRequire:

# This denies access when "SSLRequireSSL" or "SSLRequire" applied even

# under a "Satisfy any" situation, i.e. when it applies access is denied

# and no other module can change it.

# o OptRenegotiate:

# This enables optimized SSL connection renegotiation handling when SSL

# directives are used in per-directory context.

#SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire

SSLOptions +StdEnvVars

</FilesMatch>

SSLOptions +StdEnvVars

</Directory>

# SSL Protocol Adjustments:

# The safe and default but still SSL/TLS standard compliant shutdown

# approach is that mod_ssl sends the close notify alert but doesn't wait for

# the close notify alert from client. When you need a different shutdown

# approach you can use one of the following variables:

# o ssl-unclean-shutdown:

# This forces an unclean shutdown when the connection is closed, i.e. no

# SSL close notify alert is send or allowed to received. This violates

# the SSL/TLS standard but is needed for some brain-dead browsers. Use

# this when you receive I/O errors because of the standard approach where

# mod_ssl sends the close notify alert.

# o ssl-accurate-shutdown:

# This forces an accurate shutdown when the connection is closed, i.e. a

# SSL close notify alert is send and mod_ssl waits for the close notify

# alert of the client. This is 100% SSL/TLS standard compliant, but in

# practice often causes hanging connections with brain-dead browsers. Use

# this only for browsers where you know that their SSL implementation

# works correctly.

# Notice: Most problems of broken clients are also related to the HTTP

# keep-alive facility, so you usually additionally want to disable

# keep-alive for those clients, too. Use variable "nokeepalive" for this.

# Similarly, one has to force some clients to use HTTP/1.0 to workaround

# their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and

# "force-response-1.0" for this.

BrowserMatch ".*MSIE.*" \

nokeepalive ssl-unclean-shutdown \

downgrade-1.0 force-response-1.0

# Per-Server Logging:

# The home of a custom SSL log file. Use this when you want a

# compact non-error SSL logfile on a virtual host basis.

CustomLog "/opt/apache/logs/ssl_request_log" \

"%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"

</VirtualHost>

# General setup for the virtual host

ServerName ~PORTAL_HOST~.~DOMAIN_NAME~:443

DocumentRoot ~PORTAL_BASE~/portal

DirectoryIndex index.jsp

ErrorLog "|/opt/apache/bin/rotatelogs /opt/apache/logs/aptareportalSSL-error_%Y-%m-%d-%H_%M_%S.log 50M"

CustomLog "|/opt/apache/bin/rotatelogs /opt/apache/logs/aptareportalSSL-access_%Y-%m-%d-%H_%M_%S.log 50M" common

Alias / ~PORTAL_BASE~/portal/

ErrorDocument 503 /maintenance.html

JkMount /*.jsp portal

JkMount /*.do portal

JkMount /servlet/* portal

JkMount /chart* portal

JkMount /*.mvc portal

JkMount /*/bundles/*.css portal

JkMount /*.download portal

JkMount /*.login portal

JkMount /*.ajax portal

JkMount /*/bundles/*.js portal

JkMount /*.jawr-css portal

JkMount /*.jawr-js portal

JkMount /*.httprpc portal

JkMount /*.rpc portal

# SSL Engine Switch:

# Enable/Disable SSL for this virtual host.

SSLEngine on

# SSL Cipher Suite:

# List the ciphers that the client is permitted to negotiate.

# See the mod_ssl documentation for a complete list.

SSLCipherSuite ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL

# Server Certificate:

# Point SSLCertificateFile at a PEM encoded certificate. If

# the certificate is encrypted, then you will be prompted for a

# pass phrase. Note that a kill -HUP will prompt again. Keep

# in mind that if you have both an RSA and a DSA certificate you

# can configure both in parallel (to also allow the use of DSA

# ciphers, etc.)

SSLCertificateFile "/opt/apache/conf/ssl_cert/server.crt"

# Server Private Key:

# If the key is not combined with the certificate, use this

# directive to point at the key file. Keep in mind that if

# you've both a RSA and a DSA private key you can configure

# both in parallel (to also allow the use of DSA ciphers, etc.)

SSLCertificateKeyFile "/opt/apache/conf/ssl_cert/server.key"

# Server Certificate Chain:

# Point SSLCertificateChainFile at a file containing the

# concatenation of PEM encoded CA certificates which form the

# certificate chain for the server certificate. Alternatively

# the referenced file can be the same as SSLCertificateFile

# when the CA certificates are directly appended to the server

# certificate for convinience.

#SSLCertificateChainFile "/opt/apache/conf/server-ca.crt"

# Certificate Authority (CA):

# Set the CA certificate verification path where to find CA

# certificates for client authentication or alternatively one

# huge file containing all of them (file must be PEM encoded)

# Note: Inside SSLCACertificatePath you need hash symlinks

# to point to the certificate files. Use the provided

# Makefile to update the hash symlinks after changes.

#SSLCACertificatePath "/opt/apache/conf/ssl.crt"

#SSLCACertificateFile "/opt/apache/conf/ssl.crt/ca-bundle.crt"

# Certificate Revocation Lists (CRL):

# Set the CA revocation path where to find CA CRLs for client

# authentication or alternatively one huge file containing all

# of them (file must be PEM encoded)

# Note: Inside SSLCARevocationPath you need hash symlinks

# to point to the certificate files. Use the provided

# Makefile to update the hash symlinks after changes.

#SSLCARevocationPath "/opt/apache/conf/ssl.crl"

#SSLCARevocationFile "/opt/apache/conf/ssl.crl/ca-bundle.crl"

# Client Authentication (Type):

# Client certificate verification type and depth. Types are

# none, optional, require and optional_no_ca. Depth is a

# number which specifies how deeply to verify the certificate

# issuer chain before deciding the certificate is not valid.

#SSLVerifyClient require

#SSLVerifyDepth 10

# Access Control:

# With SSLRequire you can do per-directory access control based

# on arbitrary complex boolean expressions containing server

# variable checks and other lookup directives. The syntax is a

# mixture between C and Perl. See the mod_ssl documentation

# for more details.

#<Location />

#SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \

# and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \

# and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \

# and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \

# and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \

# or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/

#</Location>

# SSL Engine Options:

# Set various options for the SSL engine.

# o FakeBasicAuth:

# Translate the client X.509 into a Basic Authorisation. This means that

# the standard Auth/DBMAuth methods can be used for access control. The

# user name is the `one line' version of the client's X.509 certificate.

# Note that no password is obtained from the user. Every entry in the user

# file needs this password: `xxj31ZMTZzkVA'.

# o ExportCertData:

# This exports two additional environment variables: SSL_CLIENT_CERT and

# SSL_SERVER_CERT. These contain the PEM-encoded certificates of the

# server (always existing) and the client (only existing when client

# authentication is used). This can be used to import the certificates

# into CGI scripts.

# o StdEnvVars:

# This exports the standard SSL/TLS related `SSL_*' environment variables.

# Per default this exportation is switched off for performance reasons,

# because the extraction step is an expensive operation and is usually

# useless for serving static content. So one usually enables the

# exportation for CGI and SSI requests only.

# o StrictRequire:

# This denies access when "SSLRequireSSL" or "SSLRequire" applied even

# under a "Satisfy any" situation, i.e. when it applies access is denied

# and no other module can change it.

# o OptRenegotiate:

# This enables optimized SSL connection renegotiation handling when SSL

# directives are used in per-directory context.

#SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire

SSLOptions +StdEnvVars

</FilesMatch>

SSLOptions +StdEnvVars

</Directory>

# SSL Protocol Adjustments:

# The safe and default but still SSL/TLS standard compliant shutdown

# approach is that mod_ssl sends the close notify alert but doesn't wait for

# the close notify alert from client. When you need a different shutdown

# approach you can use one of the following variables:

# o ssl-unclean-shutdown:

# This forces an unclean shutdown when the connection is closed, i.e. no

# SSL close notify alert is send or allowed to received. This violates

# the SSL/TLS standard but is needed for some brain-dead browsers. Use

# this when you receive I/O errors because of the standard approach where

# mod_ssl sends the close notify alert.

# o ssl-accurate-shutdown:

# This forces an accurate shutdown when the connection is closed, i.e. a

# SSL close notify alert is send and mod_ssl waits for the close notify

# alert of the client. This is 100% SSL/TLS standard compliant, but in

# practice often causes hanging connections with brain-dead browsers. Use

# this only for browsers where you know that their SSL implementation

# works correctly.

# Notice: Most problems of broken clients are also related to the HTTP

# keep-alive facility, so you usually additionally want to disable

# keep-alive for those clients, too. Use variable "nokeepalive" for this.

# Similarly, one has to force some clients to use HTTP/1.0 to workaround

# their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and

# "force-response-1.0" for this.

BrowserMatch ".*MSIE.*" \

nokeepalive ssl-unclean-shutdown \

downgrade-1.0 force-response-1.0

# Per-Server Logging:

# The home of a custom SSL log file. Use this when you want a

# compact non-error SSL logfile on a virtual host basis.

CustomLog "/opt/apache/logs/ssl_request_log" \

"%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"

</VirtualHost>